The most difficult power issues in India are experienced at construction sites that are located far from the grid. Projects like highway construction, mining activities, wind or solar farm setup, arrangements for piping, or turning a plant temporarily have an uninterruptible power supply as a necessity for the operation to run smoothly, safe, and for the equipment to be protected as well. The grid, however, does not support these off the-grid locations most of the time; it is either extremely unreliable or completely non existent.
UPS rental, however, comes in as both a practical and economical solution. Renting a UPS allows providing continuous, stable, and clean power without the drawback of a heavy investment in the capital. We are going to give you a complete guide about the renting of UPS for remote construction sites in this blog post.
Reasons Why Remote Construction Sites Require UPS Power That Is Reliable
The construction process requires a lot of heavy electrical equipment like control panels, communication devices, monitoring instruments, IT systems, security cameras, elevators,cranes, and batching plants, etc. Power cuts or variations in voltage usually result in the following:
- Damaging the sensitive machines
- Delay in project completion and stagnant time
- Data loss in monitoring and automation systems
- Putting the lives of on-site workers at risk
A temporary UPS solution at a remote area where power supply is insistent would guarantee uninterrupted operations and at the same time safeguard the expensive equipment against electrical disturbances.
Rental of UPS’s Excellent Points for Construction Projects.
Industrial UPS rentals instead of buying can be a good solution that has many products, especially based on temporary requirements or project based.
- Heavy Capital Investment Is Not Required
The cost of an industrial-grade UPS can be quite high. However, with the UPS rented, you
do not have any upfront payment to make, and thus, capital is available for the activities
that are core to the construction. - Quick Deployment
The rental UPS systems to be delivered, installed, and commissioned quickly perfect for
fast-moving projects or power needs that cannot wait. - Scalability
At first, power needs might not be that high but as the project goes on, the power
requirements might change. Getting a UPS rental means that you can easily upgrade or
downgrade your capacity without having to get any new equipment. - Maintenance & Support Included
Most rental companies take care of providing maintenance, servicing, and technical
support thus lessening the burden on the engineers at your site. - Ideal for Temporary Use
In the case of short-term or phase-based construction work, a temporary UPS solution is
much more economical than ownership.
Choosing the Right UPS Capacity for Remote Sites
It is imperative to select the right UPS size for reliable operation. The following factors should be considered:
- Total connected load (10kVA or 15MVA)
- Type of equipment (sensitive electronics vs heavy machinery)
- Backup time needed
- Integration with DG sets or renewable sources
A professional industrial UPS rental provider will perform a load assessment to recommend the optimum configuration from small kVA systems to multi-MVA solutions.
Key Features to Look for in an Industrial UPS Rental
There are UPS systems that cannot be used for heavy-duty construction sites. Your rental
UPS must have :
- High input voltage tolerance for unreliable grids
- Sturdy construction to withstand dust, heat, and bad conditions
- Quick switchover to eliminate equipment shutdown
- Compatibility with diesel generators
- Remote monitoring and alarms
A trustworthy UPS rental company will also provide redundancy solutions for non-stop operations.
Compliance, Safety, and Site Conditions
It is important to give compliance and safety the top priority when renting a UPS for construction use. Assurance that:
- The tools conform to the power and safety standards of the industry.
- The setting up/installation is done according to the safety protocols for that specific site.
- Treatment of earthing and cable management is properly done.
- Fire safety and battery handling norms are observed.
With the help of industrial UPS rental companies that have been in the business for a considerable time, construction sites will be faced with challenges and consequently, compliance will be from day one.
Common Applications of UPS Rental at Construction Sites
- Remote infrastructure and road projects
- Mining and quarry operations
- Metro rail and tunnel construction
- Renewable energy installations
- Temporary site offices and control rooms
In all these cases, UPS on rent is a good solution as it gives the customer the benefits of reliability and flexibility, and it does not require a long-term commitment.
Conclusion
A steady power supply is essential for the success or failure of a remote construction project. By renting a UPS, one is not only smart but also flexibly and cost-effectively backing up the operations to be able to protect the equipment and to maintain the safety standards. With the right industrial UPS rental, the construction industry can then concentrate on project execution without the fear that power disruptions will occur.
In case your project needs reliable backup power for a short period of time or difficult location, choosing a UPS rental or a temporary UPS solution is the wisest decision.
Need Quality Power to Rent?
Get in touch with UPS Rental Service (I) Pvt. Ltd. today and learn about custom or solution oriented UPS Rental solutions tailored just for your business. visit www.upsrent.com and contact us at info@upsrent.com, (+91) 9619633221